Step-by-Step Guide to Using AGARO Imperial Vacuum Cleaner at Home
If you have just unboxed your AGARO Imperial, you are holding a 500W beast designed to make floor cleaning feel less like a chore and more like a quick "reset." However, to truly master how to use cordless vacuum cleaner technology, you need to understand the rhythm of a cordless machine—which is quite different from the old-school corded canisters.
Follow this step-by-step roadmap to turn your Imperial into a professional-grade cleaning partner.
Step 1: The Pre-Flight Check
Before you press the power button, prepare the environment. Cordless vacuums are powerful but can be derailed by large obstacles.
-
Scan the Floor: Pick up large debris like pebbles, coins, or plastic wrappers. These can clog the suction tube or tangle the motorized brush.
-
Check the Bin: Start with a fresh slate. Ensure the 0.5L dust bin is empty to allow for maximum cyclonic airflow from the start.
Step 2: Choose Your Configuration
The Imperial is a 2-in-1 tool. Choose your mode based on the target:
-
For Floors/Carpets: Attach the Aluminum Extension Tube and the Motorized Floor Brush.
-
For Above-Floor Cleaning: Attach the Triangle Suction Head or Crevice Tool directly to the motor unit for handheld ease. This is perfect for sofas, curtains, or car seats.
Step 3: Match Suction to Surface
Don’t just stick to one mode! Managing the 3-speed suction is the secret to mastering how to use cordless vacuum cleaner systems effectively:
-
Low (Green): Use this for 90% of your cleaning. It’s perfect for marble and tiles and stretches your battery to 60 minutes.
-
Medium (Blue): Use this for light rugs and upholstery. It balances power with a 20-minute runtime.
-
High (Red): Save this for "disaster zones"—spilled cereal, deep carpet grit, or car mats. Use it sparingly, as it provides 8 minutes of intense 28 kPa suction.
Step 4: The "Slow & Steady" Technique
Unlike a broom, a vacuum needs a second to let the suction work.
-
Overlapping Strokes: Move the vacuum in a slow, steady "push-pull" motion. Overlap each pass by a few inches to ensure no dust is left in the "blind spots."
-
Trust the LEDs: The floor brush has integrated LED lights. Use them to look under beds and sofas—you’ll be surprised at the dust they reveal!
Step 5: Hygienic Disposal
When the bin reaches the "Max" line, it’s time to empty.
-
One-Click Release: Hold the motor unit deep inside your trash can. Press the release button, and the trapdoor will drop the dirt. This prevents the dust from floating back into your living room air.
Step 6: Post-Clean Maintenance (The "Paisa Vasool" Step)
To ensure your vacuum lasts for years, don't just store it away after use.
-
Filter Tap: Give the HEPA filter a quick tap to release fine silt.
-
Brush Roll Check: Check if any hair has wrapped around the motorized roller and snip it off with scissors.
-
Dock & Charge: Hang the Imperial on its wall bracket. It takes about 4 hours to reach a full charge, ensuring it’s ready for your next session.
The Verdict
Learning how to use cordless vacuum cleaner tools like the AGARO Imperial is all about efficiency. Once you get used to the cordless freedom and the modular attachments, you'll find that you're cleaning more often but for much shorter periods.
